ROTRONIC Wireless Datalogger System - Manual (Page 18)

E-M-HW4v3-F2-021_10
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
HW4 software v.3: Device Manager and Data
Logging LOG-RC Series Data Loggers Instruction Manual
Document Type
Page 18 of 18
Document title
© 2011; Rotronic AG E-M-HW4v3-F2-021_10
HW4 View Data opens automatically after downloading data from the data logger. Files that have already
been downloaded can be opened from the HW4 main menu bar by selecting File > Open.
To access the “Add / Change calculated parameter” function, click on Tools in the HW4 View Data menu
bar and select “Add / Change calculated parameter”. This opens the following form:
Use the form shown on the left to select one of
the available calculated parameters.
NOTE: some parameters such as Enthalpy,
Mixing Ratio etc. require barometric pressure as
a calculation input. Be sure to enter the correct
pressure value in the form.
Click on the OK button to add the selected calculated parameter or change the existing calculated
parameter.
8 DOCUMENT RELEASES
Release Software Ver. Date Notes
_10 3.1.0 Oct. 31, 2011 Original release