ROTRONIC CF8-W-Disp-CO User Manual
Cf8-w-disp-co, User manual, Co sensor with built-in general purpose controller
Dokument
UMA 147
Rev
1
Page
1 (16)
User manual
CF8-W-Disp-CO
CO
2
/ CO sensor with built-in general purpose
controller
General
The IAQ-sensor product CF8-W-Disp-CO is used to measure indoor air carbon
dioxide and carbon monoxide concentrations. It is a very flexible controller with
programmable outputs for both relay- and linear control of e.g. mixed air dampers,
humidifier and fans. The measured values are shown on the display.
The unit can alternatively be connected to common VAV (Variable Air Volume)
controllers, or Direct Digital Control (DDC). The linear output functions are pre-
programmed. All functions can be modified from a PC with the software UIP (version
4.3 or higher) and the RS232 communication cable.
Figure 1 CF8-W-Disp-CO for wall mounting