Prochem Everest 408-650, LP-HP - Manual (Page 22)

20
Operations
Emission Control Information
The Zenith Power Products (ZPP) Emission control
labels are located on the valve cover of the engine near
the oil fill cap, and on the side of the catalytic converter.
The catallytic converter is located behind the heat
shield cover.
Date Stamp Location
When referring to an engine for assistance from your
dealer, Prochem, or ZPP please identify your engine by
the serial # and date code stamped on the surface on
the back of the engine block, approximately where indi-
cated.
Fuel Pump And Filter
Your Everest console was shipped to the dealer with a
specific fuel pump and fuel filter. Ensure that ONLY
these items are used in the installation of your unit.
The system is much more sensitive to unwanted
material in the fuel stream. Contamination of the fuel
stream may clog the injectors and adversely affect
performance. Please be sure to adhere to the filter
maintenance schedule located in the Operations
Section of this manual.
EMISSION CONTROL
LABEL
SERIAL
NUMBER
FUEL PUMP
FUEL FILTER
86352170 EVEREST
CATALYTIC
CONVERTER
SERIAL NUMBER