PNI RM3100 Sensor Suite - Manual (Page 7)

PNI Sensor Corporation Doc 1017252 r03
RM3100 & RM2100 Sensor Suite User Manual Page 6 of 45
3.2 Sen-XY-f and Sen-Z-f Characteristics
Table 3-2: Sen-XY-f and Sen-Z-f Absolute Maximum Ratings
Parameter Minimum Maximum Units
Input Pin Current @ 25 C 50 mA
Voltage Across Coil 2.0 VDC
Storage Temperature -40 +85 C
CAUTION:
Stresses beyond those listed above may cause permanent damage to the device. These
are stress ratings only. Assuming operation with the MagI2C per the guidelines in this
manual, these maximum ratings will not be violated.
Table 3-3: Sen-XY-f and Sen-Z-f Characteristics
Parameter Min Typical Max Units
Inductance
1
500-600 H
DC resistance @ 25C 15C 30 45
Resistance versus
temperature
0.4 %/C
Weight
Sen-XY-f 0.06 [0.002] gm [oz]
Sen-Z-f 0.09 [0.003] gm [oz]
Operating Temperature -40 +85 C
Footnote:
1. 1 V peak-to-peak across the coil @ 100 kHz sinewave. No DC bias resistance.
Measured o rthogonal to Earth’s magnetic field.