Ouellet OTM - Manual (Page 17)

- Staple the mat to the plywood subfloor to prevent the mat ends from curling;
- Use spray adhesive to fasten the Thermat to a concrete subfloor.
Never staple the heating cable directly to the subfloor.
4.4.1 Working Around Walls and Obstacles
- When the Thermat roll meets a wall or obstacle, simply cut the mat and pivot
it in another direction (fig. 4.4.1);
18
Staple the mat to plywood
Secure with an aerosol adhesive
on concrete
Fig. 4.4 b Fig. 4.4 c
IMPORTANT
90°
180°
Cut the mat
NEVER CUT
OR SHORTEN
THE HEATING CABLE
Change direction 90°
when you meet
an obstacle
Change direction 180°
when you meet
an obstacle
Work around
obstacles Work around a 45° wall
Obstacle
Fig. 4.4.1