NORD Drivesystems Berges-VG - Manual (Page 5)

1.3 BERGES assembly units
1.3.1 Identification
ƒ BERGES assembly units are uniquely identified by the information on the rating
plate.
ƒ When used in hazardous areas: II 2 G D c T4 135°C
ƒ Manufacturer:
BERGES ANTRIEBSTECHNIK GMBH & CO.KG
POSTFACH 1140
INDUSTRIESTRAßE 13
D - 51709 MARIENHEIDE
TELEFON ( 02264 ) 17- 0
TELEFAX ( 02264 ) 17 125
1.3.2 Use as intended
ƒ BERGES - VG
- are destined for use in the commercial sector in machinery and installations
- may be used only for the purposes ordered and confirmed
- may be operated only under the operating conditions prescribed in these Opera-
ting Instructions.
- may not be operated outside of the stipulated performance limits
ƒ Differing operating conditions will require new contractual agreements.
1.3.3 Legal provisions
Liability
ƒ The drives described in the Op. Inst. and the information, data and instructions
provided comply with the state of the art on the date of going to print.
No claims with respect to RGAE already delivered may be asserted from the infor-
mation, illustrations and descriptions.
ƒ We are unable to assume liability for damage, loss, injury or malfunctions resul-
ting from:
- improper use
- arbitrary modifictions to the VG
- incorrect work carried out on and with the VG
- operating errors
- non-compliance with the operating instructions
5
General