NORD Drivesystems TI 275271006 - Manual

Technical Information / Datasheet
IO-Extension SK CU4-IOE
1.0 Erstausgabe / first issue 4912 Rck TI 275271006 GB
version reason for change(s) issue name document speech
Pos : 2 /T ec hnis che Inf or mationen/ IO - Er weiter ung/SK CU 4-IO E / 275271006 / SK CU 4-I OE / 275271006 / Basisi nf ormati onen [ SK CU4- IO E] @ 2\ mod_1352823805880_388. doc x @ 51131 @ 6666 @ 1
SK CU4-IOE Part Number 275 271 006
IO Extension
NOTICE Validity of this document
This document is only valid in conjunction with the operating manual supplied for the respective frequency
inverter. It is essential that all the relevant information is available for the safe commissioning of this module and
the frequency inverter.
Scope of supply
1 x Module SK CU4-IOE
1 x System bus cable kit grey / black
1 x 24 VDC cable kit brown / blue
2 x Connection screws M4 x 20 cross-head
Field of use
IO extension for installation in a decentralised inverter SK 2xxE. This can be connected to the inverter
via the system bus. Two digital inputs, 2 analog inputs and 1 analog output are available.
Technical Data
Temperature range - 25°C … 50 °C Vibration resistance 3M7
Temperature class Class 3K3 Firmware version V1.2 R0
Protection class IP20
Name Terminal Data
Module power supply (load capacity) 40/44 24 VDC ± 20 %, reverse polarity protected
(≤ 2 A)
Power consumption of module 40/44 ≈ 110 mA
Digital input - operating range C1 … C2 Low: 0 V … 5 V, High: 15 V … 30 V
Digital input - specific information C1 … C2 R
i
= 8,1 kΩ, input capacitance: 10nF
Scan rate 1 ms, reaction time 1 ms
Analog input - reference voltage 11 10 VDC ±0,1 V, ≤ 20 mA (output)
Analog input - differential input version 13/14; 15/16 Resolution: 12 Bit, accuracy: 0.1 V
Analog output - load capacity 17 ≤ 10 mA (Mode: 0/2 … 10 V)
≤ 20 mA (Mode: 0/4 … 20 mA, at 5 V)
Analog output - specific information 17 Resolution: 10 Bit, accuracy: 0.25 V