NORD Drivesystems B1091 - Manual (Page 10)

-10- B1091-GB-4613 www.nord.com
5. Motors with ignition protection
class "increased safety Exe"
Painting: The motors are supplied with a maximum paint thickness of 0.2 mm in order to prevent electrostatic
charging. In case of repainting, the total thickness of the paint layer, including the original painting, must not
exceed 0.2 mm.
Type plate for NORD Exe motors according to EN 60079
Explanation of the standard details on the type plate
EN 60034 (H), (A)/ EN 60079
Standard series used for explosion protection
(Please note the Declaration of Conformity)
Voltage range A according to EN 60034-1
Half key balancing according to EN 60034-14
Product standard
1 Data Matrix Code 9 Operating mode 17 Explosion protection labelling
2 Code number of the designated
body 10 Details of standards 18 Start-up current/nominal current
3 Number of phases 11 Nominal frequency 19 t
E
- time
4 Type designation 12 Nominal voltage 20 Note: TMS with statement of the t
A
time only
with PTC tripping device according to
DIN 44082
5 Order number / motor number 13 Permissible voltage range 21 Notice ! Observe operating instruction
B1091.
6 Year of manufacture: 14 Data sheet number 22 Nominal power
7 Temperature class 15 Power factor 23 Nominal current
8 Housing protection type 16 Speed 24 Individual serial number