Register slc, Obtaining additional licenses – Milestone XProtect Transact User Manual
Page 12
Milestone XProtect
®
Transact
Administrator's Guide
www.milestonesys.com
12
Installation and licensing
Even if the old database and its content remain on the computer, if you choose to install the new
database, it is not possible for you to access the data in the old database by removing XProtect
Transact 2.5 and reinstalling XProtect Transact 2.2. If it is very important for you to access the old
database, you can contact your Milestone vendor.
For information about the export features in the XProtect Smart Client see Exporting Data and
Recordings in th
e XProtect Smart Client in the XProtect Transact User’s manual and the separate
documentation for the XProtect Smart Client.
Register SLC
If you do not have your SLC, contact your vendor.
1. Go to the Milestone website a
nd click the Software registration link
in the menu.
2. Log in to the Software Registration Service Center with your user name (e-mail address) and
password.
Tip: If you have not used the Software Registration Service Center before, click t
he New to
the system? link, and follow the instructions for registering yourself as a user, then log into the
Software Registration Service Center by using your registered user name and password.
3. In the Software Registration Service Center, click the Add SLC link.
4. Type your SLC. Confirm that you want to add the SLC to your account, and then click OK.
5. Once your SLC has been added, click the Main menu link.
6. Click the Logout link to log out of the Software Registration Service Center.
Tip: If you plan to use online activation when you activate your licenses, make sure you use
the same user name (e-mail address) and password that you used when you registered the
SLC.
Obtaining additional licenses
If you want to view more simultaneous transaction sources than you currently have licenses for, you
must purchase additional licenses for these transaction sources. You can add and configure an
unlimited number of transaction sources in XProtect Transact, but only simultaneously view the
number of sources that are included your CLK.
To obtain additional licenses for your XProtect XProtect Transact system, contact your XProtect
XProtect Transact vendor.
Once you have obtained the required additional licenses, do the following to activate them:
1. When you have received a confirmation about the purchase of the new licenses, go to the
Milestone website, and click the Software registration link in the menu.
2. Log in to the Software Registration Service Center with your user name (e-mail address)
and password.
3. Click the link representing your XProtect Transact SLC.