Acer 1820PT - Manual (Page 42)

32 Chapter 2
DOS Flash Utility
Perform the following steps to use the DOS Flash Utility:
1. Press F2 during boot to enter the Setup Menu.
2. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move
USB HDD to position 1.
3. Execute the FLASH.BAT batch file to update BIOS.
The flash process begins as shown.
4. In flash BIOS, the message Please do not remove AC Power Source displays.
NOTE: If the AC power is not connected, the following message displays.
Plug in the AC power to continue.
5. Flash is complete when the message Flash programming complete displays.
InsydelH20 Setup Utility Rev. 3.5
F 1
E s c H e l p
E x i t S e l e c t I t e m
S e l e c t M e n u C h a n g e Va l u e s
S e l e c t
S u b - M e n u E n t e r
F 9
F 1 0 S e t u p D e f a u l t
S a v e a n d E x i t
Boot priority order :
1. IDE0 : TOSHIBA MK2555GSX
2. IDE1 :
3. Network Boot : Atheros Boot Agent
4. USB HDD :
5. USB CDROM :
6. USB FDD :
F 5 / F 6
M a i n B o o t Exit Security Information
Item Specific Help
Use < > or < > to select
a device, then press
to move it up the
list, or to move it
down the list. Press
to escape the menu