Dwyer UHH - Manual (Page 6)

Alternative Home Displays Views
In addition to displaying the measurements as a digital meter, the UHH allows the
user to view the measurements either as a gauge, a gauge with range bands, or as
a graphical strip chart.
• In the view menu, choose GAUGE mode to display a digital analog gauge like one
similar to a speedometer. The available range will be adjustable with min and max
scale feature.
• Adjust both the min and max for the associated values that will correspond to
the 0° value for min and the 180° value for the max or full scale reading.
• In this example, the min is zero and the max is 500. The live process value is
shown under the gauge dial.
• The mid point will always show at the 90° point on the gauge dial.• Select RANGE
in the VIEW category in the view menu.
• Two sets of min and max will appear listed as GAUGE and RANGE.
• The GAUGE settings are just as in the previous GAUGE view mode and show the
zero and full scale points of the dial.
• The RANGE low and high settings provide a different color green zone to appear
on the dial of the digital gauge. This two color band dial provides a quick
determination during a test if the reading is in the pass or fail zone.
• In this example, the GAUGE has a min of 0 and a max of 500. The RANGE low
is 100 while the high is 400.
• A green zone on the dial corresponding to the RANGE low/high settings will
appear on the home screen.
• Select STRIP in the view category in the view menu. This option offers the user
a strip chart style graph with Y axis scaled with the selected major sensor setting
and an X axis showing the selected time.
• The x axis time may be adjusted from 10 to 3,600 seconds.
• Besides the time setting shown on the graph, you can program the graph to show
full scale of the range of the sensor, half scale where the top of the Y axis is half
of the full scale, or mid-scale where half the full scale value is displayed in the
middle of the Y axis.
View RANGE Mode
Home View RANGE Mode
View STRIP Mode
View GAUGE Mode
Home View GAUGE Mode
Some probes or modules may have selectable ranges that are
programmed in the PROBE menu under RANGE. You cannot
go above this chosen full scale RANGE in the GAUGE setting in the VIEW menu..
NOTICE
Home View STRIP Mode