Dwyer UHH-BTG - Manual

Model UHH-BTG Wireless Mobile Gateway
Specifications - Installation and Operating Instructions
Bulletin TE-UHH-BTG
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]
SPECIFICATIONS
Wireless Protocol: Conforms to Bluetooth SIG, Inc. low energy wireless
technology.
Wireless Distances: 50´ (15 m) or greater.
Response Time: 1 s.
Temperature Limits:
Ambient: 5 to 125°F (-15 to 51°C);
Battery Charging: 32 to 113°F (0 to 45°C).
Power Requirements: 3.7 V YT562447 lithium ion battery, installed functional,
user replaceable.
Weight: 2.5 oz (70.87 g).
Agency Approvals: CE with CE approved charger, RoHS, FCC.
The Model UHH-BTG Wireless Mobile Wireless Gateway transforms the
wireless signal from any Dwyer Instruments, Inc. universal handheld probe or
module into a Bluetooth SIG, Inc, Wireless Technology. Using this gateway, any
iOS
® Firmware version 5.X or later or Android ® Firmware version 3.X or later
smartphone or tablet can become the base instrument for measuring or logging.
Once the gateway is paired with a phone or tablet, our Mobile Meter™ app or any
other Dwyer Instruments, Inc. approved apps can detect available probes or
modules. Wireless gateways can detect probes or modules that are 50 feet away
or even greater distances depending on the environment. The wireless signal from
the gateway to the mobile device adds at least another 25 feet of sensing distance.
Model UHH-BTG is compact in size and clips on to most standard belts. The
rechargeable battery can be charged using the same mini-USB cable and charger
as the probes or modules. LED lights indicate the battery status and whether the
gateway is communicating properly.
2-13/16
[71.50]
2-7/16
[61.98]
1-3/16
[29.86] 1-17/32
[39.15]
LED Status
Paired or pairable to
phone or tablet
Communications to
mobile device or probes
Charging or powering off
Low battery
iOS ® is a registered trademark of Cisco Systems, Inc.
Android ® is a registered trademark of Google, Inc.
Belt Clip
Bi-Color LED Power Button
USB Charger
Connector
Figure 1
Blue LED
Slow blink
Rapid blink
Off
Off
Red LED
Off
Off
Solid
Slow Blink
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference. and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
Cet appareil est conforme à des règlements d'Industrie Canada exempts de licence
standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes:
(1) Ce dispositif ne doit pas causer d'interférences nuisibles, et (2) cet appareil doit
accepter toute interférence reçue, y compris les interférences pouvant entraîner un
fonctionnement indésirable.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du
Canada.
NOTICE