Dwyer DLI-H - Manual (Page 26)

Data Logger Manual
Page 25
6.14 Power Modes Screen:
Displays information regarding the devices different power modes including
the display visibility, backlight options, and LED modes.
F1 = DISPLAY: first highlights and then changes display visibility (On: full
visibility or Auto: shuts off after 5 minutes of inactivity)
F2 = BKLGHT: first highlights and then changes backlight options (On: backlight
always on, Auto: backlight shuts off after 30 sec of inactivity, or Off: backlight
always off)
F3 = LED: first highlights and then changes LED mode options
F4 = MORE: moves to Display Update Mode screen
CANCEL = Returns to Device Configuration Menu
OK = moves to Display Update Mode screen
UP = once parameter configuration tab is highlighted scrolls through available
options
DOWN = once parameter configuration tab is highlighted scrolls through
available options
6.15 Display Update Mode Screen:
Displays information regarding display refresh mode and refresh interval.
F1 = MODE: first highlights and then changes update mode (Auto: screen
refreshes periodically or Reading: refreshes only after a reading is taken)
F2 = TIME: first highlights and then changes refresh interval.
F4 = MORE: moves to Power Status screen
CANCEL = Returns to Device Configuration Menu
OK = moves to Power Status screen