Dwyer PMT - Manual (Page 4)

Particulate Monitoring Systems
Installation & Operating Manual
Document No. 209-1026-E
iv ©2007
III. Approvals and Certifications
CE Conformant
The Electronics and Particulate Sensors conform to the appropriate country standards and
governing regulations listed below:
EN 55011/2002
Limits and methods of measurement of radio interference
characteristics of industrial, scientific and medical equipment. Group
1, Class A.
EN61000-6-2/2001 Electromagnetic compatibility – Generic immunity standard Part 6-2:
Industrial environments.
EN61000-4-2/2000 Electrostatic discharge (ESD), 4kV contact discharge, 8kV air
discharge, 4kV horizontal and vertical coupling planes.
EN61000-4-3/2002 Radiated electromagnetic fields, 10V/m, 80-1000Mhz.
AC line isolation for the Particulate Transmitter must be provided by an
external isolating DC power supply with CSA or UL marking. No power
supply is provided with or sold as an accessory.
CSA Certified
This Particulate Monitoring system is certified by the Canadian Standards Association (to
US and Canadian Standards) for use in hazardous locations as is specified below:
Hazardous Locations
Class I, Division 2 Groups A, B, C, and D
Class II, Division 2 Groups F, G
Class III