Dwyer instruments, inc – Dwyer 43000 User Manual

Page 6

DWYER INSTRUMENTS, INC.

Phone: 219/879-8000

www.dwyer-inst.com

P.O. BOX 373 • MICHIGAN CITY, IN 46361, U.S.A.

Fax: 219/872-9057

e-mail: [email protected]

Printed in U.S.A. 2/11

FR# 16-440405-00 Rev.1

1. Capsu-Photohelic

Gage Body & Sensor Assembly

2. Cover, Knob and Zero Adjust Assembly
3. “O” Ring Seal for Cover
4. Bezel with Groove for Snap Ring
5. Mounting Ring
6. Snap Ring (Mounting)
7. Screws for Mounting Ring, #6-32 x 1-1/4˝ RHMS, (4) Required
8. Optional A-314 Bleed Fitting, 1/4˝ NPT

Figure 10

9. 1/8˝ NPT Mounting Stud
10. Flange Plate and Bracket Assembly for Circuit Board with Mounting Screws
11. Lock Washer
12. 1/8˝ NPT Mounting Nut
13. Amplifier-Relay Circuit Assembly
14. Gasket for Housing
15. Housing for Amplifier-Relay Unit with (3) #6-32 x 5/16˝ RH Machine Screws
16. 1/4˝ NPT Pipe Plugs (Not Shown)

When corresponding with the factory regarding Capsu-Photohelic

switch/gage problems, refer to the call-out numbers in this view. Be sure to
include range, single or double circuit and circuit style letters where required.
Field repair is not recommended; contact factory for service information.

Exploded View

B-34:E-56atex 2/22/11 9:15 AM Page 6