Crystal nVision Lab Reference - Manual (Page 4)

Operating Instructions  2
CrystalControl Operation Manual
—
Operating instruCtiOns
CrystalControl will automatically detect your nVision Reference Recorder when connected. If no nVision is found check cables and verify that the recorder is
turned on. Click Find Gauge to reestablish communications.
Click Select Gauge .
—
navigating in CrystalCOntrOl
CrystalControl is organized into three major functions: configuration settings (Config), data viewing and archiving (DataViewer), and Tools to set your data
storage locations and product update strategies.
•
Config allows configuration or setting changes to the nVision platform, and the Upper, Lower, and BARO modules. Each appropriate platform or module can
be selected for modification from the left-hand tabs. Click Update Gauge to implement your selections to the recorder.
•
DataViewer allows quick viewing of live recording or previously recorded data runs. Additional features such as zooming, changing units, and exporting or
archiving to .xls/.csv/.pdf file formats are also available.
Config settings tabs
Functions tabs Update Gauge button Tools button
Navigate through CrystalControl with the function tabs.