Settings, Gauge identity – Crystal ConFigM30 Digital Pressure Calibrator Software User Manual
Page 5
Settings
3
ConfigM30 User's Manual
Settings
Settings are arranged in groups;
—
GAUGE IDENTITY
The only user setting is the “message store” —all other information is programmed by the factory.
Store information specific to an individual gauge in the Message store text box.
The Gauge Identity area displays information specific to the gauge currently connected.
•
S/N:
The serial number as reported by the gauge.
•
Model:
Model of the gauge (not available on older models).
•
Range(s):
The pressure range of the gauge, reported in PSI regardless of the default unit.
•
Firmware Version:
The firmware version of the gauge.
•
Password Protected:
Indicates if the password protection has been enabled for the gauge.
•
Message Store:
Message store is typically used as a place to enter an asset or tag or identification number, but can be used for other purposes like owner
information. This information is available through ConfigM30 and may also be used and reported by other Crystal Engineering software applications, such as
or
essage store is limited to 16 characters.