Product unpacking and inspection, License requirements, Identification and label information – Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities User Manual
Page 6: Product unpacking and inspection 6, License requirements 6, Identification and label information 6

PRODUCT UNPACKING AND INSPECTION
NOTE:
N
If damage to the shipping container is evident upon receipt, request the carrier to be present when the
product is unpacked
Carefully open the shipping package, follow any instructions that may be marked on the exterior Remove all cushioning
material surrounding the product and carefully lift the product from the package Retain the package and all packing
material for possible use in reshipment or storage
Visually inspect the product and applicable accessories for any physical damage such as scratches, loose or broken parts, or
any other sign of damage that may have occurred during shipment
NOTE:
N
If damage is found, request an inspection by the carrier’s agent within 48 hours of delivery and file a claim with the
carrier
A claim for equipment damage in transit is the sole responsibility of the purchaser
LICENSE REQUIREMENTS
This device complies with Part 15 of FCC Rules Operation of this device is subject to the following conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation
In accordance with FCC Regulations, “Code of Federal Regulations” Title 47, Part 2, Subpart J,
Section 1091, transmitters (endpoints) pass the requirements pertaining to RF radiation exposure.
However, to avoid public exposure in excess of limits for general population (uncontrolled
exposure), a 12 CM distance between the transmitter (endpoint) and the body of the user must be
maintained during testing.
No FCC license is required by a utility to operate an ORION meter reading system
This device complies with Industry Canada license-exempt RSS standard(s) Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement
Any changes made, but not approved by Badger Meter, can void the user’s authority to operate the equipment
IDENTIFICATION AND LABEL INFORMATION
The ORION remote endpoint is packaged in a 3-1/2" x 6-1/4" gray housing that includes an external, three-conductor wire
Certification markings are noted on the product label Label markings include:
• Serial number and bar code plus product description
• FCC identification
• Certification markings
ORION® Gas Endpoints, Remote Endpoint for Gas Meters and Volume Correctors with Pulsed Outputs
Page 6
July 2013