Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 17)

WIRING CONNECTION INSTRUCTIONS
There are three types of wiring connections:
1 to a volume corrector
2 to a gas RT with gel caps
3 to an alternative electric or mechanical switch closure
Regardless of the mounting method, the remote endpoint should be mounted so the wire exits the module bottom
The wire should be secured to the pipeline or other stationary object using cable ties (not supplied) or other means
The remote ORION remote endpoint is supplied with a six (6) foot long cord, 3-conductor cable
The wires can be extended to up to 75 feet
The endpoint wire terminations depend on the corrector device and its proximity to the endpoint
Volume Corrector
ORION Remote
Endpoint Wire
Connected to Meter
ORION Remote
Endpoint
Installation Manual
Page 17 July 2013