Badger Meter High Resolution LCD Encoders (HR-E LCD) - Manual (Page 10)

HR | E LCD Encoder
INSTALLING THE HR-E LCD ENCODER
Bayonet Mount
The fully potted encoder assembly has a bayonet mount compatible with all Recordall Disc, Turbo Series, Compound Series,
Combo Series and Fire Series meters and assemblies The bayonet mount positions the encoder in any of four orientations for
visual reading convenience The HR-E LCD Encoder can be removed from the meter without disrupting water service
The HR-E LCD Encoder is available factory pre-wired to Badger Meter AMR/AMI products The HR-E LCD Encoder is
permanently sealed to eliminate the intrusion of moisture, dirt, or other contaminants, and is suitable for installation in all
environments, including meter pits subject to continuous submergence
Install the encoder on the water meter and secure it using the tamper-proof screw provided
Wire Connections
The HR-E LCD is provided as either a factory-wired assembly or as an encoder with pre-sized wire harness available for
connection in the field Standardized lead lengths are 3, 10, 25, and 75 feet See ADE-I-01 for instructions
308 In-Line Connector
The Badger Meter 308 In-line connector is an optional feature that allows connectivity to a AMR/AMI devices without the
need for a field splice kit See ORI-I-69 for instructions
Page 10 December 2012