Badger Meter ORION Classic (CE) - Manual (Page 13)

Installing Meter Reading Software on the Handheld
1. Insert the memory stick with the software files into the USB port on the handheld.
Figure 12: Start>Programs>File Explorer
2. Tap Start > Programs > File Explorer.
3. Tap the drop-down menu in the tool bar and select Hard Disk.
NOTE: N If the memory stick is not inserted, Hard Disk does not display.
Figure 13: Hard disk
4. Tap Hard Disk to see the software files.
IMPORTANT
Make sure you install the three files in order: 0, 1, 2.
5. Tap to select the first file labeled "0 NETCFv35.
wm.arm.v4i."
Result: The file location window opens as shown in
Figure 15 on the next page.
Figure 14: Software installation files
Installation Manual
Page 13 August 2012