Badger Meter ORION Classic (CE) - Manual (Page 12)

INSTALLING ORION METER READING SOFTWARE ON THE HANDHELD
The ORION Meter Reading System software comes loaded on one CD provided by Badger Meter. Three software files are
included on the CD:
• 0 – .NET framework
• 1 – Badger Field Applications. These include:
- ORION Field Application (OFA) 2.2
- ORION CE Profile Extraction
- ORION Endpoint Utility
- ORION CE Repeater Programmer
- IHD Programmer
- GALAXY Programmer
- BMI FTP
• 2 – Daylight Savings update
IMPORTANT
The files must be installed in order: 0, 1, 2.
Transferring Software Files from the CD to a USB Memory Stick
1. Load the ORION Meter Reading System CD on a computer with a CD drive.
2. The CD folder may open automatically. If not, open Windows Explorer, browse to the CD drive location and open the
CD folder.
Result: Three files labeled 0, 1 and 2 will be displayed as shown in Figure 11.
Figure 11: Software installation files
3. Insert a memory stick into the USB port on the computer.
4. Select the three .cab files from the CD and copy them to the memory stick.
Result: The ORION Meter Reading System software files on the memory stick are ready to be installed on the handheld.
5. Safely remove the memory stick from the computer.
ORION® Handheld Meter Reading System 2.2 Software Installation
Page 12 August 2012