beautypg.com

Assembly, Assembl y – Alamo RHINO 1900 User Manual

Page 103

background image

ASSEMBLY

1900 07/11

Assembly Section 3-7

© 2011 Alamo Group Inc.

ASSEMBL

Y

Check the welded in pins between the stabilizers jaws are in contact with the mounting rail. If not the machine
must be lowered to the ground and the next higher hole on the stabilizer valve selected, the machine raised
and contact checked. Repeat again in the third hole if necessary. On subsequent fitting to the same tractor the
hole selected is always used.

Adjust the top link to bring the frame of the
machine into the vertical position.