West Control Solutions TB 40-1 Temperature Monitor - Manual (Page 18)

5.2 Parameters
Lim
Name Value range Description Default
LC -1999...9999 LC limit 100
L.2
-1999...9999 Lower limit 2 OFF
H.2
-1999...9999 Upper limit 2 OFF
HYS.2 0...9999 Hysteresis limit 2 1
L.3 -1999...9999 Lower limit 3 OFF
H.3 -1999...9999 Upper limit 3 OFF
HYS.3
0...9999 Hysteresis limit 3 1
InP.1
Name Value range Description Default
InL.1
-1999...9999 Input value for the lower scaling point 0
OuL.1 -1999...9999 Displayed value for the lower scaling point 0
InH.1 -1999...9999 Input value for the upper scaling point 20
OuH.1 -1999...9999 Displayed value for the upper scaling point 20
t.F1
-1999...9999 Filter time constant [s] 0,5
rnG
Name Value range Description Default
rnG.L
-1999...9999 Set-point limit low for set-point LC -1999
rnG.H -1999...9999 Set-point limit high for set-point LC 9999
g
Resetting the device configuration to factory setting (Default)
r chapter 10.1 (page 30)
Parameter setting level
Parameters 18 TB40-1