West Control Solutions TB 40-1 Temperature Monitor - Manual (Page 12)

g
The variable to be monitored can be selected seperately for each alarm via
configuration
The following variables can be monitored:
w process value
w control deviation xw (process value - LC limit ( LC ))
3.7 Operating structure
After supply voltage switch-on, the controller starts with the operating levels.
The controller status is as before power off.
g
PArA - level: At PArA - level, the right decimal point of the upper
display line is lit continuously.
g
ConF - level: At ConF - level, the right decimal point of the upper
display line blinks.
All levels are only accessible by entry of the password PASS .
When safety switch Loc is open, no access to all levels is possible.
Factory setting:
Safety switch Loc closed: all levels accessible without
restriction, password
PASS = 45.
Safety switch
Loc
Password entered with
BluePort®
Function disabled or enabled
with BluePort®
Access via the instrument
front panel:
closed OFF / password disabled / enabled enabled
open OFF / password disabled disabled
open OFF enabled enabled
open Password enabled enabled after password
entry
Operation
Operating structure 12 TB40-1
Щ
Щ
Щ
Щ
End
126
CAL
126
ConF
126
125
126
PArA
126
Щ
М
М
М
3 sec.
PASS
PASS
PASS
PASS