Asus INTEL CUW(E)-FX - Manual (Page 66)

ASUS CUW(E)-FX User’s Manual 66
4. BIOS SETUP
4. BIOS SETUP
USB Function [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. Set to [En-
abled] if you want to use USB devices. Configuration options: [Disabled]
[Enabled]
ONB VGA BIOS First [No]
This field, when set to [Yes], gives priority to the onboard VGA BIOS over
other VGA controllers. Configuration options: [No] [Yes]
Onboard LAN Boot ROM [Disabled]
When the onboard LAN boot ROM is enabled, you may choose to boot
from an Intel UNDI PXE-compliant network that your system is connected
to. To do so, you must restart the system after setting this field to [Enabled],
enter BIOS Setup, go to the Boot menu, and select the option that contains
Intel UNDI, PXE under Other Boot Device. Configuration options: [Dis-
abled] [Enabled]
IRQ XX Used By ISA [No/ICU]
These fields indicate whether or not the displayed IRQ for each field is
being used by a legacy (non-PnP) ISA card. The default value indicates
either that the displayed IRQ is not used or that ISA Configuration Utility
(ICU) is being used to determine if an ISA card is using that IRQ. If you
install a legacy ISA card that requires a unique IRQ and you are not using an
ICU, you must set the field for that IRQ to [Yes]. For example: If you install
a legacy ISA card that requires IRQ 10, then set IRQ10 Used By ISA to
[Yes]. Configuration options: [No/ICU] [Yes]
PCI/PNP ISA IRQ Resource Exclusion
PCI Configuration