Asus INTEL CUW(E)-FX - Manual (Page 38)

38 ASUS CUW(E)-FX User’s Manual
Connectors
3. H/W SETUP
3. HARDWARE SETUP
23) Headphone True-Level Line Out Header (3-pin SPKR)
This header allows you to connect a chassis mounted headphone to the mother-
board instead of having to attach an external headphone to the ATX connectors.
®
CUW(E)-FX
CUW(E)-FX Internal Speaker Connector
SPKR
LINEOUT_LEFT LINEOUT_RIGHT
1 3
GND
24) Chassis Intrusion Lead (2-pin ACHA)
This lead is for a chassis designed for chassis intrusion detection. After-market
toggle switches may also be installed to the chassis panel or on any removable
components. Two wires should be available from the chassis to connect to this
lead. When any chassis component is removed, the contact should open and the
motherboard will record a chassis intrusion event. The event can then be pro-
cessed by software such as LDCM. If the chassis intrusion lead is not used, a
jumper cap must be placed over the pins to close the circuit.
®
CUW(E)-FX
CUW(E)-FX Chassis Open Alarm Lead
ACHA