Asus INTEL CUW(E)-FX - Manual (Page 30)

30 ASUS CUW(E)-FX User’s Manual
Connectors
3. H/W SETUP
3. HARDWARE SETUP
3) Universal Serial Bus Ports 1 & 2 (Two Black 4-pin USB)
Two back panel USB ports are provided for connecting USB devices. If you
prefer to use front panel USB ports, you can connect an external connector set to
the USB header and mount it on the front panel (see Front Panel USB Header
later in this section). NOTE: The back panel and front panel ports cannot be
used at the same time.
Universal Serial Bus (USB) 2
USB 1
4) Parallel Port Connector (Burgundy 25-pin PRINTER)
You can enable the parallel port and choose the IRQ through Onboard Parallel
Port (see 4.4.2 I/O Device Configuration).
NOTE: Serial printers must be connected to the serial port.
Parallel (Printer) Port (25-pin female)
5) Serial Port COM1 Connector (Teal/Turquoise 9-pin COM1)
One serial port is ready for a mouse or other serial devices. A second serial port
is available using a serial port bracket connected from the motherboard to an
expansion slot opening. See Onboard Serial Port 1 in 4.2.2 I/O Device Con-
figuration for settings.
COM 1
Serial Port (9-pin male)