Asus INTEL CUW(E)-FX - Manual (Page 18)

18 ASUS CUW(E)-FX User’s Manual
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
1) Onboard Audio Codec Setting (CODEC)
available on audio model only
The onboard audio CODEC may be enabled or disabled using all of these jump-
ers. Disable the onboard audio CODEC if you are using a PCI audio card on any
of the expansion slots or a primary AMR on the AMR slot (see AMR Slot later in
this section). If using a PCI audio expansion card, Onboard AC’97 Audio Con-
troller in 4.4.2 I/O Device Configuration must also be disabled.
Setting
CODEC
Enable [1-2] [1-2] [1-2] [1-2] (default)
Disable [2-3] [2-3] [2-3] [2-3]
®
CUW(E)-FX
CUW(E)-FX Audio Codec Setting
Disable Enable
1
2
3
1
2
3
SPK
ADN#
AUD_EN1
AUD_EN2
SPK
ADN#
AUD_EN1
AUD_EN2
2) PCI 3 Volt Setting (PCI3VSBSEL)
This jumper allows you to select the voltage supplied to PCI devices. If you
have PCI devices that require auxiliary power, set this jumper to Enable 3 VSB.
Setting PCI3VBSEL
+3 VSB [1-2] (default)
+3 Volt [2-3]
®
CUW(E)-FX
CUW(E)-FX PCI 3 Volt Selection
+3 VSB
PCI3VSBSEL
+3 Volt
1 2 3 1 2 3