Thermo Fisher Scientific Alpha COND 190 (In the process of updating the brand guideline & product image) - Manual (Page 25)

22
8.7 Viewing Conductivity Calibration Data – P5.0
Program 5 is a “view only” option, which displays the value at which calibration was
performed.
P5.1: view Calibrated conductivity value (if no calibration performed for this range,
controller displays ‘- - - - ‘).
These parameters will change each time you recalibrate the controller.
P5.0
C L
P5.1
CAL
300
Press ▲and ▼keys together (ESCAPE) at anytime, to leave the Setup mode and
return to Measurement mode.
P5.0: Viewing Calibrated Conductivity data
1.
Key in the password “022” as per procedure in Section 5.
2. Press ▲key until screen displays P5.0 and CAL. Press ENTER.
3. Screen will scroll P5.1, ‘CAL’, then Calibrated value (in uS/cm or mS /cm).
4. Press ▲and ▼keys together (ESCAPE) twice, to return to measurement
mode.