Thermo Fisher Scientific Alpha COND 2000 (In the process of updating the brand guideline & product image) - Manual (Page 7)

Instruction Manual
αlpha CON 2000
1
1 INTRODUCTION
1.1 At the very beginning
We thank you for having purchased the Eutech Instruments αlpha CON 2000.
The construction of the αlpha CON 2000 employs leading edge technology and complies with
safety regulations currently in force. Notwithstanding this, improper use could lead to hazards
for the user or a third-party, and/or adverse effects on the plant or other equipment. Therefore,
the operating instructions must be read and understood by the persons involved before
work is started with the
αlpha CON 2000.
Eutech Instruments do not accept any liability for damage that may arise from
neglecting information given in this manual.
This instruction manual identifies safety instructions and additional information by means of
the following symbols:
This symbol draws attention to safety instructions and warnings of potential
danger which, if neglected, could result in injury to persons and/or damage to
property.
This symbol identifies additional information and instructions which, if neglected,
could lead to inefficient operation and possible loss of production.
The instruction manual must always be stored close at hand, in a place accessible to all
people working with the
αlpha CON 2000.
If you have questions, which are not or insufficiently answered in this instruction manual,
please contact your Eutech Instruments supplier. He will be glad to assist you.
1.2 Intended use
Eutech Instruments αlpha CON 2000 is intended solely for conductivity and temperature
measurement, as described in this instruction manual.
Any other use, or use not mentioned here, that is incompatible with the technical specifications
is deemed inappropriate. The operator is solely responsible for any damage arising from such
use.
Other prerequisites for appropriate use include:
− observing the instructions, notes and requirements set out in this instruction manual.
− observing all local safety regulations concerning safety at work.
− observing all information and warnings in the documentation dealing with the products
used together with the transmitter (housings, sensors, etc.).
− observing the prescribed environmental and operational conditions.