Thermo Fisher Scientific CyberScan TB 1000 Turbidimeter - Manual (Page 4)

CyberScan TB1000
1
1 Introduction
Thank you for purchasing Eutech Instruments’ CyberScan Turbidimeter TB1000 series White Light or Infrared
turbidity meter (CyberScan TB1000 hereafter). These turbidity meters have been designed for simple and easy
measurement of turbidity.
This manual contains simple steps to follow to ensure that your instrument is operating properly. This material
assumes that the user knows how to obtain representative samples of their process and has some familiarity with
measuring the turbidity of samples.
The following sections describe how to use and care for your CyberScan TB1000. In certain instances notes or
reminders have been added to give further clarification to the instructions. Refer to the Table of Contents or the
Glossary to easily find specific topics and to learn about unfamiliar terms.
2 Unpacking The Instrument
2.1
Packing List of Contents
Item Description Qty
CyberScan TB1000 Laboratory Turbidimeter Instrument 1
Accessory Kit for TB1000 (0.02 NTU, 10.0 NTU, 1000 NTU Standards and 2 empty
sample cuvettes) 1
TB1000 Laboratory Turbidimeter Instruction Manual 1
Note: Power adapter (120/220VAC) has to be ordered separately; see Section 10 Accessories
and Replacement Parts List for details.
2.2 Unpacking and Inspection of the Instrument and Accessories
Remove the Accessory Kit and the instrument from the packing carton. Carefully inspect all items to ensure that
no visible damage has occurred during shipment.
NOTE: Extra care should be taken when unpacking, opening, and handling the calibration standards and
sample cuvettes in the Accessory Kit; surface scratches or finger smudges on the cuvette surface may cause
measurement errors. Handle these items by the top area of the cuvette only.