Measurement, Taking ph measurements, Automatic temperature compensation – Thermo Fisher Scientific CyberScan PD 300 User Manual

Page 22: Measurement 17, 5 measurement

Text mode
Original mode

Instruction Manual

PD 300

5 MEASUREMENT

5.1

Taking pH Measurements

5.1.1

Automatic Temperature Compensation

Automatic Temperature Compensation only occurs when a compatible temperature sensing
element is plugged into the meter.

If there is no temperature sensor plugged into the meter, the default manual temperature

setting is 25 °C

. You can manually set the temperature to match your working conditions

using a separate thermometer.

For automatic temperature compensation (ATC) simply
plug the temperature probe into the meter (see page 6
for directions). The ATC indicator will light up on the
LCD. See figure on right.

Figure 13: Automatic Temperature

Compensation

NOTE

The temperature sensing element must be in the

sample that you are calibrating or measuring.

5.1.2