Spectrex 40/40L-LB UV/IR Flame Detector Series - Manual (Page 69)

Long Range UV/IR Fire Simulator 57
D Accessories
➣ In this appendix…
Long Range UV/IR Fire Simulator page 57
Tilt Mount - P/N 40/40-001 page 60
Duct Mount P/N 777670 page 61
Weather Protection - P/N 777163 page 61
Laser Detection Coverage Pointer - P/N 777166 page 63
Air Shield - P/N 777650
page 64
This appendix describes the accessories that can help you maximize fire
detection with the SharpEye UV/IR flame detector:
D.1 Long Range UV/IR Fire Simulator
The SharpEye UV/IR Long Range Fire Simulator 20/20-311is designed
specifically for use with SharpEye UV/IR flame detectors. The Fire Simulator
emits IR radiation in a unique sequential pattern corresponding to and
recognizable by the IR3 UV/IR detector as fire. This allows the IR3 UV/IR
detectors to be tested under simulated fire conditions without the associated
risks of an open flame.
There is an optional beam collimator, model no. 20/20-190, specially
designed for extended test range.
Figure 15: SharpEye UV/IR Long Range Fire Simulator 20/20-311