Calibration – SHIMPO FGE-series User Manual

Page 4

SHIMPO ONE-

SHIMPO ONE-YEAR W

YEAR W

YEAR WARRANTY

ARRANTY

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!

right to satisf y warranty obligation in full by reimbursing Buyer for all pay-
ments made to Shimpo Instruments, whereupon, title shall pass to Shimpo

Instr uments upon acceptance of return goods. To obtain warranty ser-
vice, Purchaser must obtain Shimpo Instrument’s authorization before re-
turning the product, properly repackaged, freight pre-paid to Shimpo In-

struments.
INDEMNIFICA

INDEMNIFICA

INDEMNIFICATION & LIMIT

TION & LIMIT

TION & LIMITAAAAATION OF DAMAGES:

TION OF DAMAGES:

TION OF DAMAGES: Buyer agrees to indem-

nif y and hold Shimpo Instruments harmless from and against all claims
and damages imposed upon or incurred arising, directly or indirectly, from
Buyer’s failure to perfor m or satisfy any of the terms described herein. In

no event shall Shimpo Instruments be liable for injuries of any nature in-
volving the product, including incidental or consequential damages to per-

son or proper ty, any economic loss or loss of use.
MERGER CL

MERGER CL

MERGER CLAAAAAUSE:

USE:

USE: Any statements made by the Seller’s representative do

not constitute warranties except to the extent that they also appear in writ-

ing. This writing constitutes the entire and final expression of the parties’
agreement.

LIMITED EXPRES

LIMITED EXPRESS W

S W

S WARR

ARR

ARRANTY

ANTY

ANTY::::: Shimpo Instruments warrants, to the

original purchaser of new products only, that this product shall be free

from defects in workmanship and materials under normal use and proper
maintenance for one year from the date of original purchase. This
warranty shall not be effective if the product has been subject to overload,

misuse, negligence, or accident, or if the product has been repaired or
altered outside of Shimpo Instruments’s authorized control in any respect

which in Shimpo Instr uments’s judgment, adversely affects its condition
or operation.
DISCL

DISCL

DISCL AIMER OF ALL OTHER W

AIMER OF ALL OTHER W

AIMER OF ALL OTHER WARR

ARR

ARRANTIES:

ANTIES:

ANTIES: The foregoing warranty

constitutes the SOLE AND EXCLUSIVE WARRANTY, and Shimpo Instruments
hereby disclaims all other warranties, expressed, statutor y or implied,

applicable to the product, including, but not limited to all implied warranties
of merchantability and fitness.
LIMIT

LIMIT

LIMITAAAAATION OF REMED

TION OF REMED

TION OF REMEDYYYYY::::: Under this warranty, Shimpo Instruments’s SOLE

OBLIGATION SHALL BE TO REPAIR OR REPLACE the defective product or
part, at Shimpo Instr uments’s option. Shimpo Instruments reser ves the

SHIMPO INSTRUMENTS

1701 Glenlake Avenue, Itasca, IL 60143 USA

(630) 924-7138 FAX (630) 924-0342

Calibration

Frequent calibration is necessary to insure the accuracy of
your force gauge.

Required for Calibration:

1. A secure calibration stand to mount a force gauge upside-

down.

2. The appropriate calibration weight for your force gauge:

Calibration Procedure:

1. Turn POWER off.

2. Mount the force gauge upside-down on the calibration stand.

3. Attach the hook on the sensing shaft of the force gauge.

4. Press and hold the UNIT, PEAK and ZERO switches.

5. Press and release the POWER switch (while continuing to

press UNIT, PEAK and ZERO) until the smaller characters at
the top area of the display show

CAL. Release the UNIT,

PEAK and ZERO switches. The force gauge is now in cali-
bration mode.

6. Press the UNIT switch. The display will show

ZER. The

force gauge is now ready for zero point calibration.

7. Press ZERO to zero point calibrate. Wait 5 seconds. The

display will change to show

PEK. Do not press any other

switches or move the sensing shaft during calibration.

8. Hang the calibration weight on the hook and stabilize; the

larger characters on the display will change. The force gauge
is now ready for full scale calibration.

9. Press the PEAK switch to begin full scale calibration. Do not

press any other keys or touch the weight during calibration.
After approximately 5 seconds the display will show

END.

10. Press the UNIT switch. If calibration was successful, the dis-

play will show

OK momentarily, then automatically power

off. If calibration was unsuccessful, the display will show
ERR. Remove the calibration weight and repeat the proce-
dure from step 6.

MODEL WEIGHT
FGE-0.5 200g
FGE-1 500g
FGE-2 1Kg
FGE-5 2Kg

MODEL WEIGHT
FGE-10 5Kg
FGE-20 10Kg
FGE-50 20Kg
FGE-100 50Kg