Revo REHVDPTZ22-1 INSTRUCTION MANUAL User Manual

Page 52

To ensure that the login procedure is performed as securely as possible when using
SMTP authentication, you must define the weakest authentication method allowed.

- Login Method: Set the Weakest method allowed to the highest/safest method

supported by the mail server. The most secure method is listed in the drop-down list:

• SMTP(E-Mail) Receiver:

- Receiver: Enter an email address. You can also register the e-mail address of

recipients up to 8.

• SMTP(E-Mail) Test:

- Receiver: Enter an email address and click the Test button to test that the mail servers

are functioning and that the email address is valid.

② FTP & JPEG

When the network camera detects an event, it can record and saves images to an FTP
server. Images can be sent as e-mail attachments. Check the box to enable the service.

• FTP Setting

- Server: Enter the server's IP address or host name. Note that a DNS server must be

specified in the TCP/IP network settings if using a host name.

- Port: Enter the port number used by the FTP server. The default is 21.

- Use passive mode: Under normal circumstances the network camera simply requests

the target FTP server to open the data connection. Checking this box issues a PASV
command to the FTP server and establishes a passive FTP connection; whereby the
network camera actively initiates both the FTP control and data connections to the
target server. This is normally desirable if there is a firewall between the camera and
the target FTP server.