Revo REHVDPTZ22-1 INSTRUCTION MANUAL User Manual

Page 50

2. Select New Motion (or Mask) Window in the mouse menu.

3. Click and drag mouse to designate a motion area.

• Motion Detection Setting:

The behavior for each window is defined by adjusting the Threshold and Sensitivity, as
described below.

A motion index is a set of parameters describing Window Name, Type, Threshold,
Sensitivity, and Dwell Time. Window Types is one of Motion and Mask windows.

- Threshold: Sets up the sensitivity for the motion detection.

- Sensitivity: Sets up the sensitivity for the motion detection.

- Dwell Time: Set the hold time an event lasts for the specified hold time from the point

of detection of a motion.

You can also modify or delete a motion index. Select an index and then, click the Modify
or Delete button.

Select “Enable” to activate the motion window.

Note: Motion event could be occurred by the movement of manual control &

function operation.

⑤ Network Loss

This is used to trigger the event every time the network connection is failed.
Select “Enable” to activate the Network Loss event.