Revo REHVDPTZ22-1 INSTRUCTION MANUAL User Manual

Page 27

Text mode
Original mode

The NIGHT SHOT option removes the IR cutoff filter of the camera and makes the camera
sensitive to near infrared.

AUTO

Camera goes in to B&W mode at low light.

GLOBAL

Controlled by the keyboard
(NOTE: GLOBAL function operates F2E protocol only)

The operator can enable NIGHT SHOT for all dome cameras at the same time.
If the NIGHT SHOT mode is set to GLOBAL, “999” + ENTER will turn Off the NIGHT
SHOT mode and “888” + ENTER will turn On the NIGHT SHOT mode.

ON B/W mode
OFF Color mode

NOTE: AUTO in NIGHT SHOT function is not applied in “MANUAL” mode of AE Control.

• DNR CONTROL

DNR SETUP

2DNR(1) : 001
3DNR(1) : 010
2DNR(2) : 001
3DNR(2) : 003
SAVE AND EXIT(ESC TO CANCEL)

2DNR(1), 2DNR(2)

Select 2D noise reduction level (OFF / 1 ~ 7)

3DNR(1), 3DNR(2)

Select 3D noise reduction level (OFF / 1 ~ 31)

NOTE: DNR(1) applied when motor stopped. DNR(2) applied when motor moving.