Revo RESPTZ37-1/HSC/HSW Advanced Features - Manual (Page 8)

REVO America www.revoamerica.com RESPTZ37-SERIES
6
Titling
Many of the features provide the ability to create titles that appear on the monitor when the
camera reaches a specific position, or to label an Auto Scan, Preset, Tour, etc. Rather than
describe the procedure to create a title in every description, the instructions are provided here.
The titling procedures are the same for all functions. The amount of characters allowed for titles
do change depending upon the function. Maximum characters allowed are noted in each
description. Note that Presets must be created before you create the title.
To create a title, proceed as follows:
TITLE EDIT MENU
A01
*
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0 1 2 3
4 5 6 7 8 9 ( )
ALL DELETE
EXIT(ESC TO EXIT)
1. Navigate to the TITLE EDIT MENU and move joystick to the right to select it.
2. Using the joystick, move over the letter or number that you want to use in the title. You can
also twist the joystick right or left to scroll through the characters.
3. Press the CTRL key to select the character.
4. Continue selection until you have created the title.
5. Select EXIT with the joystick and move to the right or left to exit the menu or press ESC on
the keyboard controller.
To delete the title and create a new one, select ALL DELETE and move the joystick right or left.
Home Function
Another function that you will use often with the Advanced Features is the Home Function. The
Home Function defines the camera’s normal operation when left unattended. The Home Function,
once programmed, will return the camera to its normal or programmed operation after manual
control of the camera has stopped. For example, if you are using the keyboard controller or DVR