Revo RESPTZ37-1/HSC/HSW Advanced Features - Manual (Page 18)

REVO America www.revoamerica.com RESPTZ37-SERIES
16
Tour
This menu provides the options for creating Tours, which are a programmed sequence of events
for the camera. A tour can include Presets, Auto Scans, Patterns and even other Tours and save
them. Up to 8 Tours may be programmed. Each tour has 42 positions that may be programmed.
By using second-level tours, a single tour can include over 300 functions.
TOUR SETUP
NUMBER : 01
TITLE : T01
SCAN TYPE : NORMAL
SPEED : 5 STEP
DWELL : -- SEC
003 A08 --- --- --- --- ---
--- --- --- --- --- --- ---
--- --- P01 --- --- --- ---
--- T02 --- --- --- --- ---
--- --- --- --- --- --- ---
--- --- --- --- --- --- ---
SAVE AND EXIT(ESC TO CANCEL)
NUMBER:
01-08. Selects the Tour number to be programmed.
TITLE:
Tour title that will display when this tour is selected.
SCAN TYPE:
NORMAL/VECTOR
SPEED:
01-13. With 01 as the slowest speed and 13 as the fastest speed.
DWELL:
03-99 sec. Sets the dwell time for the tour actions.
Tour Actions: - - -:
Blank position
003:
Indicates Preset number 3
A04:
Indicates Auto Scan number 4.
P01:
Indicates Pattern number 1.
T02:
Indicates Tour number 2. This will run as a secondary tour within
the tour that you are programming.
Follow the steps below to program the Tours: