Advanced features – Revo RESPTZ37-1/HSC/HSW Advanced Features User Manual
Page 5
REVO America
www.revoamerica.com
RESPTZ37-SERIES
3
A
A
d
d
v
v
a
a
n
n
c
c
e
e
d
d
F
F
e
e
a
a
t
t
u
u
r
r
e
e
s
s
This manual describes the advanced features of your RESPTZ37-Series dome camera. The User
manual should be followed for installation and basic setup of the camera. This manual assumes
that the camera has been installed and set up using that manual, RESPTZ37-10B. In this manual
you will learn how to set up Auto Scans, Presets, Patterns, Tours, Alarms, Area Titles and Privacy
Zones. You will do this using the DOME MENU and the submenus and a control device such as a
keyboard controller or DVR.
In addition, Appendix A of this manual provides a shortcut key list that provides the shortcut keys
you can use on the REVO keyboard controller to initiate various camera functions.
For the purposes of describing the commands and configurations available on the camera, all
commands and operation of the camera will be initiated using a REVO America keyboard
controller. This is the ideal setup and offers the greatest flexibility and ease of operation. However,
a REVO America DVR may also be used to control the camera, as well as non REVO America
keyboard controllers or DVRs, which may be used providing you set the protocols correctly using
the User manual. See the Settings section in that manual. If using another device, refer to the
applicable user manual to determine the equivalent command keys.
Access the camera menu as follows:
1. Log into keyboard controller by entering the administrator’s password. On the REVO
America keyboard controller, the default password is: 9999.
2. Select camera by pressing the camera number, for example 1, and then the CAM key on
the keyboard controller.
3. Press the MENU key on the keyboard controller. The DOME MENU displays.