Revo RESPTZ37-1/HSC/HSW Advanced Features - Manual (Page 10)

REVO America www.revoamerica.com RESPTZ37-SERIES
8
Auto Scan
The Auto Scan Setup menu enables you to set a programmed scan of an area such as a room.
You can set the camera to start in one location and move to another location and then back to the
starting location at a preconfigured speed. Up to 17 different Auto Scans may be configured.
AUTO SCAN SETUP
NUMBER : 01
TITLE : A01
MODE : NORMAL
SPEED : 5 STEP
START ANGLE : ----- -----
END ANGLE : ----- -----
SCAN DIR : CCW
SWAP : OFF
DWELL : 03 SEC
SAVE AND EXIT(ESC TO CANCEL)
NUMBER:
01-17. 09 is Auto Pan mode, which will cause endless panning.
TITLE:
Allows you to create a unique name for each auto scan. Up to 12
characters.
MODE:
NORMAL/ VECTOR/ RANDOM (AUTO PAN mode: NORMAL/RANDOM
only).
NORMAL:
Move from start point to end point using panning only.
VECTOR:
Move from start point to end point panning with tilting and
zooming, simultaneously and linearly.
RANDOM:
Move randomly between the start point and the end point.
SPEED:
01-13. With 01 as the slowest speed and 13 as the fastest speed.
START ANGLE:
Defines the starting point for the Auto Scan.
END ANGLE:
Defines the ending point for the Auto Scan.
SCAN DIR:
Defines the scan direction. CW: clockwise. CCW: counterclockwise.
SWAP:
Swaps the starting and ending points.