Revo NVR - Manual (Page 57)

Part 3 - Configuration
57
• Set: Used to set up a tour profile.
- Name: Enter a name for the tour profile.
- No.: Indicates the order of the function in the
tour sequence.
- Dwell Time (sec.): Specify how long to
perform the selected function for.
- Speed: Specify the preset speed.
• Test: Select a tour profile and then click Test to
test it.
• Edit: Used to edit the selected tour profile.
• Remove: Used to remove the selected tour
profile.
Select Apply after setting up a preset, scan,
pattern, or tour profile to see images from the
concerned camera on the left side of the screen.
Selecting
Apply or OK displays a popup screen
that indicates whether the profile has been set
up successfully.
5 Home Position: Specify the camera's home
position.
• Default: Uses the factory-default position as the
camera's home position.
• Custom: Uses the user-defined position as the
home position.
• Select Set to change the home position.
6 Auto Run: Specify which action to take if
the camera has not been controlled for the
specified duration of time.
7 Auto Pan: Specify the camera's panning
direction. When Auto Pan is selected from
a remote program, the camera pans in the
direction selected here.
8 Auto Flip: Automatically flips the image when
the camera tilts past 90° to prevent the objects
from appearing upside down.
• Digital: Flips the image left to right or top to
bottom.
• Mechanical: Automatically pans or tilts the
camera.
• Off: Disables Auto Flip.
9 Tilt-Range: Specify the camera's tilting range.
0 Restore: Specify whether to restore the
camera to its last position or function. Enabling
this option restores the camera to its last
position or function after being restarted.
• SSL: Set the camera's security level as
Unavailable, Standard, High, or Very High.
Standard, High and Very High settings apply SSL
(Secure Sockets Layer) protection to the camera.
• Power: Control the camera's power. This option is
available when connecting to Video In/PoE port or
using a PoE Switch (optional). Select
Reset in the
camera’s power settings to restart the camera.
Privacy Masking Options
Select Name to rename the privacy masking area.
Select the icon to delete the existing privacy
masking area. Select
Privacy Masking Setup to
display additional privacy masking area options. You
can drag on the area with the mouse to resize it or
add up to 16 different areas.
• Edit: Rename the selected privacy masking area.
• Delete: Delete the selected privacy masking area.