AMD SBX-5363 - Manual (Page 44)

BIOS
- 40 -
Useing Password to set a password that will be used exclusively on the
system. To specify a password, highlight the type you want and press
. The Enter Password: message prompts on the screen. Type the
password, up to eight characters in length, and press . And the
system confirms your password by asking you to type it again. After setting a
password, the screen automatically returns to the main screen. To disable a
password, just press the key when you are prompted to enter the
password. A message will confirm the password to be disabled. Once the
password is disabled, the system will boot, then you can enter BIOS Setup
freely.
3.12 Save & Exit Setup
Typing "Y", you will quit the setup utility and save all the changes into the
CMOS memory.
Typing "N", you will return to Setup utility.
BIOS
- 41 -
3.13 Exit Without Saving
Typing 'Y" will quit the Setup utility without saving the modifications.
Typing "N" will return you to Setup utility.
3.14 BIOS Beep Sound code list
Message
System booting is normally
CMOS setting error
DRAM error
Display card or monitor connected error
Keyboard error
ROM error
DRAM hasn't inset correctly
POWER supply has problem Beep Sound
1 short (Beep)
2 short (Beep)
1 long - 1 short (Beep)
1 long - 2 short (Beep)
1 long - 3 short (Beep)
1 long - 9 short (Beep)
Long (Beep) continuous
Short (Beep) continuous