NSi Industries ELC72 - Manual (Page 18)

16
Day of Week type: Up to 10 day of week type holidays
can be programmed . Each of the 10 holidays can either
be assigned as one of the 3 holiday schedules A, B or
C or not selected . Examples of day of week type
holidays are:
1st Monday in September (Labor Day)
Last Monday in May (Memorial Day)
Span type: Up to 10 span (block) type holidays can be
programmed . Each of the 10 blocks can either be
assigned as one of the 3 holiday schedules A, B or C or
not selected . Examples of span type holidays are:
December 20 beginning to January 07 ending (winter
break)
March 07 beginning to March 14 ending (spring break)
Press the PROGRAM key to bypass and go to next
mode .
Press the NEXT key to go to the first setting .
7.1 SET SPECIAL (SPEC) HOLIDAYS
Press the + to bypass .
Press the NEXT key advance to first SPEC day .
For flashing NO, use the + or - keys and show YES to
select day .
Use the + or - keys to select the holiday type (A, B, or
C) .
Press the NEXT key to advance . Move through all six
special day types .
Press the PROGRAM key to return to top of HOL
screen to program another holiday type .
Press the PROGRAM key twice when holiday
programming complete and go to next mode .