NSi Industries ELC72 - Manual (Page 15)

13
For flashing channel number, use the + and - keys and
show YES to select the channel the input will affect .
Press the NEXT key to advance to the next channel for
same choice .
• OVr (Toggle override with or without delay) next
screen is used for setting the on time when the input
is configured as an OVr (toggle) override type .
The on time is programmable from 0 seconds to 23
hours, 59 minutes and 59 seconds . When this on
time is set to 0:00 .00, the override functions as a
toggle on/toggle off override . When a non-zero value
is programmed, the override functions as a timed on/
toggle off override .
Select OVr .
Program hours, minutes, or seconds if desired .
For flashing channel number, use the + and - keys and
show YES to select the channel the input will affect .
Press the NEXT key to advance to the next channel .
• ENb (Enabler input)
Select ENb .
For flashing channel number, use the + and - keys and
show YES to select the channel the input will affect .
Press the NEXT key to advance to the next channel .
• Sensor settings are not assigned to channels and are
used in Sensor Event Mode .
Select sensor type .
NOTE: For TORK EPC-LC light sensor select U
F: Fahrenheit temperature sensor (-40 to 215)
C: Celsius temperature sensor (-40 to 102)
L: Light level sensor (0 to 100)
U: User defined sensor (0 to 255)
Calibrate to adjust sensor input . Zero is default .