beautypg.com

Installation – KROHNE OPTIMASS 2400 User Manual

Page 25

background image

INSTALLATION

3

25

OPTIMASS 2400

www.krohne.com

07/2014 - 4003533101- MA OPTIMASS 2400 R01 en

3.4.13 Zero calibration

The procedure for zero calibration is contained in the converter handbook. However, the
following information should be considered when installing the meter.

3.4.14 Sunshades

The meter MUST be protected from strong sunlight.

Zero calibration

1 Where the meter has been installed vertically, install shut-off valves either side of the meter to assist with zero cali-

bration.

2 If the process flow cannot be stopped, install a bypass section for zero calibration.

1 Horizontal installation
2 Vertical installation

MA_OPTIMASS_2400_en_140515_4003533101_R01.book Page 25 Thursday, July 31, 2014 5:08 PM