KROHNE DK 32 Purge EN - Manual (Page 5)

SAFETY INSTRUCTIONS
1
5
DK32
www.krohne.com 04/2011 - 4000898801 MA DK32 Air purge set R02 en
Safety instructions
1.1 Intended use
The variable area flowmeters manufactured by KROHNE Messtechnik GmbH are suitable for
measuring gases, vapors and liquids.
These flowmeters are particularly suitable for measuring:
• Liquids
• Hydrocarbons
• Water
• Chemicals with low corrosiveness
• Saturated steam
• Superheated steam
• Industrial gases
1.2 Certifications
The flowmeter meets the statutory requirements of the following EC directives:
• Pressure Equipment Directive 97/23/EC
• EMC Directive 89/336/EC for instruments with electrical options
• ATEX Directive 94/9/EC for instruments in Ex-areas
KROHNE Messtechnik GmbH certifies successful testing of the product by applying the CE
mark.
DANGER!
In case of instruments which are used in explosive endangered areas please consider the
supplementary installation and operating instructions mentioned in the Ex-manual.
WARNING!
The operator shall bear sole responsibility for the use of the flowmeters with regard to
suitability, intended use and corrosion resistance of the materials used to the process product.
The manufacturer shall not be liable for any damage resulting from improper use or use for
other than the intended purpose.
Do not use any abrasive or highly viscous process products.
CE marking
MA_DK32_Purge_R02_en_898801_PRT.book Page 5 Wednesday, April 6, 2011 3:01 PM