KROHNE DK 32 Purge EN - Manual (Page 11)

DEVICE DESCRIPTION
2
11
DK32
www.krohne.com 04/2011 - 4000898801 MA DK32 Air purge set R02 en
2.3 Nameplate DK32
Additional markings on the flowmeter:
• SO - sales order / item
• KO - KROHNE order
• Vx - product configurator code
• AC - article code
2.4 Description code
The description code consists of the following elements*:
* positions which are not needed are omitted (no blank positions)
INFORMATION!
Before installing the flowmeter, make sure that the information given on the nameplate
corresponds to the ordering data.
Figure 2-2: Nameplate
1 Type of meter
2 Manufacturer
3 Appointed ATEX & DGRL body
4 Design data: temperature & pressure rating
5 DGRL data
6 Ex data
7 Electrical connection data
8 Pay regard to manual
9 KROHNE website
1 32 - with valve and horizontal connection
2 RE - inlet pressure regulator / RA - outlet pressure regulator
3 K1 - one limit switch / K2 - two limit switches
4 S - plug connector / L - cable gland incl. cable
5 HT - high-temperature version
6 A - limit switch EC type-tested
7 EX - Explosion-protected equipment
8 SK - SIL2 compliance of limit switches acc. to IEC 61508
MA_DK32_Purge_R02_en_898801_PRT.book Page 11 Wednesday, April 6, 2011 3:01 PM