KROHNE SU 600 Ex EN - Manual (Page 8)

supply unit for connected sensors.SU 600 Ex is designed for
connection of an individual 4 … 20 mA sensor. The instrument
is suitable for carrier rail, panel and surface mounting.
SU 600 Ex signal conditioning instrument can power the
connected sensor and also evaluate its measurement signals.
The requested parameter is indicated in the display and, in
addition, outputted to the integrated current output for further
processing. Hence the measuring signal can be transmitted to
a remote display or a connected control system. In addition,
two level relays for control of pumps or other actuators are
integrated.
Wide-range power supply unit with 20 … 253 V AC/DC for
world-wide use.
You will find detailed information on the power supply in the
"Technical data" in the "Supplement".
3.3 Adjustment
The adjustment of SU 600 Ex is carried out via the integrated
keys and a 16-step function switch.
3.4 Storage and transport
Your instrument was protected by packaging during transport.
Its capacity to handle normal loads during transport is assured
by a test acc. to DIN EN 24180.
The packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. For special versions PE
foam or PE foil is also used. Dispose of the packaging material
via specialised recycling companies.
l
Storage and transport temperature see "Supplement –
Technical data – Ambient conditions"
l
Relative humidity 20 … 85 %
Physical principle
Power supply
Packaging
Storage and transport tem-
perature
8 SU 600 Ex - 4 ... 20 mA signal conditioning
Product description
30653
-EN
-050803